The PERRIN Reverse Lockout Lever combines the OEM reverse lockout ring and plastic boot holder into one part making for a clean and simple look for your shifter. The PERRIN Reverse Lockout Lever's ring's finish matches the PERRIN Shift Knob base making it look like one assembly.
The factory reverse lockout link wears out with high mileage and aggressive shifting, causing a shifter rattle. The PERRIN Reverse Lockout Lever incorporates (2) silicone O-rings, creating a tight fit with a smooth friction free action, even on worn shifters.
Installation time is roughly 1 hour for the DIY'er. Any professional shop should be able to complete the install in about 30 minutes. Take a look at the instructions to see for yourself.
Machined from billet 6061 aluminum, the PERRIN Reverse Lockout Lever is polished and anodized black, matching the shifter collar on PERRIN Shift Knobs. Featuring (2) Silicone O-rings and special grease, the PERRIN Reverse Lockout Lever is perfect for any tuner.
PSP-INR-250 = 2004-2021 STI
PSP-INR-251 = FR-S / BRZ / 86
2006-2009 Legacy 2.5GT Spec- B - Yes
COBB Short Shifter - No
This part is designed to work with all OEM shifters, new or worn out. Aftermarket shifters may or may not work due to tolerance differences. Please measure the outside diameter of the shifter (where lockout slides) before installing PERRIN reverse lockout. It must measure smaller than .514" on all surfaces, or the PERRIN reverse lockout may not slide smoothly. It also may not be smaller than .500" or it could rattle on the shifter.
PERRIN Performance warrants to the original purchaser that all PERRIN products will be free from defects in material and workmanship within a sixty (60) month period from the date of purchase. *Some exclusions apply
Thank you for signing up.